You have no items in your shopping cart.
0item(s)
You have no items in your shopping cart.
This is a killer combination that is stronger than stock. Made from billet 8620 alloy and billet 9310 alloy. It's a four piece setup because we have modified the top driver gear from a 2 inch diameter keyed shaft to a 2.375 35 spline shaft. massively stronger that the stock configuration. By going with the 35 spline shaft we had to modify the primary gear also to a 2.375 - 35 spline international to mate with it's new style top shaft. This is a killer combination that has yet to see failure
CALL 318-636-0900 for Pricing Information.
Product Code: kk-ouv-12012
This is a killer combination that is stronger than stock.
Made from billet 8620 alloy and billet 9310 alloy. It's a four piece setup because we have modified the top driver gear from a 2 inch diameter keyed shaft to a 2.375 35 spline shaft. massively stronger that the stock configuration. By going with the 35 spline shaft we had to modify the primary gear also to a 2.375 - 35 spline international to mate with it's new style top shaft. This is a killer combination that has yet to see failure
Made from billet 8620 alloy and billet 9310 alloy. It's a four piece setup because we have modified the top driver gear from a 2 inch diameter keyed shaft to a 2.375 35 spline shaft. massively stronger that the stock configuration. By going with the 35 spline shaft we had to modify the primary gear also to a 2.375 - 35 spline international to mate with it's new style top shaft. This is a killer combination that has yet to see failure
Also Purchased
-
Rockwell 2.5 Ton Axle Seal/Upgraded/Wobble Seal
Rockwell front axle seal for u-joint style axles. This is a replacement with the seal retainer. Larger and much improved over the factory axle seal. -
2.5 Ton Rockwell Pinion Brake Inboard Kit
Rockwell pinion brake mounting bracket kit. This bracket kit is for mounting the caliper toward the center of the axle. It WILL NOT work on the outboard side due to... -
Rockwell 2.5 Ton Boot Guard
Rockwell boot guards. Protect your boots with these replacements for the flimsy factory stuff. Improved design for better ground clearance. Cut and formed from 5/16" steel with drain holes and... -
Rockwell 2.5 Knuckle Bolt Conversion Ends
These tapered ends are pushed into the knuckle so you can run a 3/4 bolt through the knuckle ends. Sold as a pair.
