2.5 Ton Rockwell Pinion Brake Inboard Kit

Rockwell pinion brake mounting bracket kit. This bracket kit is for mounting the caliper toward the center of the axle. It WILL NOT work on the outboard side due to bearing cap bolt spacing. May help with leaf spring interference. Rotor diameter of 10.063". Caliper remains flush with the top of the inspection cover. Cut from 3/8" steel with a new design allowing the bracket to be installed and removed without removing the pinion flange. Using the Toyota caliper and Mazda rotor this bracket provides the least expensive alternative for good brakes on a Rock. Best suited for running brakes and driveshaft on opposite ends of the pinion shaft. Kit includes spacers, longer grade 8 bolts, lockwashers and redrilled rotor. (**Works Best With 1987 Toyota PickUp 4 Cylinder 4X4 Caliper**)